Windows boot partition missing after Kali Linux installation.












1















[Windows 10 User Installed Kali 2.0]



This seems to be the issue of many beginner users of Kali Sana. Installing Kali and either formating their windows partitions not making windows bootable any more or setting up kali in a means that windows partitions aren't easily accessible.



I think I have done the 1st of the 2 formatted my drive because I don't see it any where when searching Gparted in kali.



If there is a way to recover my windows that would be a blessing. Only directions I have seen that look like they may be useful are the installation of software like rEFind and Fixparts.



If anybody has any advice that could assist in my situation I am all ears.










share|improve this question














bumped to the homepage by Community 10 mins ago


This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.




















    1















    [Windows 10 User Installed Kali 2.0]



    This seems to be the issue of many beginner users of Kali Sana. Installing Kali and either formating their windows partitions not making windows bootable any more or setting up kali in a means that windows partitions aren't easily accessible.



    I think I have done the 1st of the 2 formatted my drive because I don't see it any where when searching Gparted in kali.



    If there is a way to recover my windows that would be a blessing. Only directions I have seen that look like they may be useful are the installation of software like rEFind and Fixparts.



    If anybody has any advice that could assist in my situation I am all ears.










    share|improve this question














    bumped to the homepage by Community 10 mins ago


    This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.


















      1












      1








      1








      [Windows 10 User Installed Kali 2.0]



      This seems to be the issue of many beginner users of Kali Sana. Installing Kali and either formating their windows partitions not making windows bootable any more or setting up kali in a means that windows partitions aren't easily accessible.



      I think I have done the 1st of the 2 formatted my drive because I don't see it any where when searching Gparted in kali.



      If there is a way to recover my windows that would be a blessing. Only directions I have seen that look like they may be useful are the installation of software like rEFind and Fixparts.



      If anybody has any advice that could assist in my situation I am all ears.










      share|improve this question














      [Windows 10 User Installed Kali 2.0]



      This seems to be the issue of many beginner users of Kali Sana. Installing Kali and either formating their windows partitions not making windows bootable any more or setting up kali in a means that windows partitions aren't easily accessible.



      I think I have done the 1st of the 2 formatted my drive because I don't see it any where when searching Gparted in kali.



      If there is a way to recover my windows that would be a blessing. Only directions I have seen that look like they may be useful are the installation of software like rEFind and Fixparts.



      If anybody has any advice that could assist in my situation I am all ears.







      partition windows kali-linux gparted






      share|improve this question













      share|improve this question











      share|improve this question




      share|improve this question










      asked Nov 9 '15 at 1:40









      The nuubThe nuub

      62




      62





      bumped to the homepage by Community 10 mins ago


      This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.







      bumped to the homepage by Community 10 mins ago


      This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
























          1 Answer
          1






          active

          oldest

          votes


















          0














          A while back I almost installed an update of GRUB (Linux bootloader) on top of my Windows bootloader. This would make Windows unbootable. If this is your case, then data from the Windows partition is recoverable either by copying the data from within Kali, or by using the Windows install disk to repair the installation (have you tried that?).



          If you have indeed formatted the Windows partition, you can either try to recover the data yourself by using the software you mentioned, or by handing the hard drive over to a data recovery company. The thing is that the more you write on top of the former Windows partition, the less data it will be possible to recover.






          share|improve this answer
























          • Xavras Wyzryn So far I have been trying to get the "apt-get install update" to run properly. So the answer to have I tried the software or a recovery method is no, not yet. A little more detail about the install, it was my second time installing from a bootable usb so I thought I knew what I was doing. When asked what drive to save partition to I chose the main hard drive. That's why I think I may have formated the drive. I am going to try to get the rEFind to work 1st then try to recover if that doesn't work. It's been 3 days so I hope I haven't lost to much of my windows files.

            – The nuub
            Nov 9 '15 at 6:21













          • It's only showing 2 partitions the extended partition isn't shown. I can get rEFind to install or run. So Looks Like I am on the recovery route. I'll let you know the out come asap

            – The nuub
            Nov 9 '15 at 6:51











          • do you have any idea what to do when this happens trying to install rEFind. ShimSource is none Installing rEFInd on Linux.... The ESP doesn't seem to be mounted! Trying to find it.... // doesn't seem to be on a VFAT filesystem. The ESP must be mounted at //boot or //boot/efi and it must be VFAT! Aborting!

            – The nuub
            Nov 9 '15 at 7:10













          • @Thenuub: Instead of using rEFInd, have you tried entering BIOS at startup and selecting manually a partition to boot from?

            – Xavras Wyzryn
            Nov 10 '15 at 14:12











          Your Answer








          StackExchange.ready(function() {
          var channelOptions = {
          tags: "".split(" "),
          id: "106"
          };
          initTagRenderer("".split(" "), "".split(" "), channelOptions);

          StackExchange.using("externalEditor", function() {
          // Have to fire editor after snippets, if snippets enabled
          if (StackExchange.settings.snippets.snippetsEnabled) {
          StackExchange.using("snippets", function() {
          createEditor();
          });
          }
          else {
          createEditor();
          }
          });

          function createEditor() {
          StackExchange.prepareEditor({
          heartbeatType: 'answer',
          autoActivateHeartbeat: false,
          convertImagesToLinks: false,
          noModals: true,
          showLowRepImageUploadWarning: true,
          reputationToPostImages: null,
          bindNavPrevention: true,
          postfix: "",
          imageUploader: {
          brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
          contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
          allowUrls: true
          },
          onDemand: true,
          discardSelector: ".discard-answer"
          ,immediatelyShowMarkdownHelp:true
          });


          }
          });














          draft saved

          draft discarded


















          StackExchange.ready(
          function () {
          StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f241732%2fwindows-boot-partition-missing-after-kali-linux-installation%23new-answer', 'question_page');
          }
          );

          Post as a guest















          Required, but never shown

























          1 Answer
          1






          active

          oldest

          votes








          1 Answer
          1






          active

          oldest

          votes









          active

          oldest

          votes






          active

          oldest

          votes









          0














          A while back I almost installed an update of GRUB (Linux bootloader) on top of my Windows bootloader. This would make Windows unbootable. If this is your case, then data from the Windows partition is recoverable either by copying the data from within Kali, or by using the Windows install disk to repair the installation (have you tried that?).



          If you have indeed formatted the Windows partition, you can either try to recover the data yourself by using the software you mentioned, or by handing the hard drive over to a data recovery company. The thing is that the more you write on top of the former Windows partition, the less data it will be possible to recover.






          share|improve this answer
























          • Xavras Wyzryn So far I have been trying to get the "apt-get install update" to run properly. So the answer to have I tried the software or a recovery method is no, not yet. A little more detail about the install, it was my second time installing from a bootable usb so I thought I knew what I was doing. When asked what drive to save partition to I chose the main hard drive. That's why I think I may have formated the drive. I am going to try to get the rEFind to work 1st then try to recover if that doesn't work. It's been 3 days so I hope I haven't lost to much of my windows files.

            – The nuub
            Nov 9 '15 at 6:21













          • It's only showing 2 partitions the extended partition isn't shown. I can get rEFind to install or run. So Looks Like I am on the recovery route. I'll let you know the out come asap

            – The nuub
            Nov 9 '15 at 6:51











          • do you have any idea what to do when this happens trying to install rEFind. ShimSource is none Installing rEFInd on Linux.... The ESP doesn't seem to be mounted! Trying to find it.... // doesn't seem to be on a VFAT filesystem. The ESP must be mounted at //boot or //boot/efi and it must be VFAT! Aborting!

            – The nuub
            Nov 9 '15 at 7:10













          • @Thenuub: Instead of using rEFInd, have you tried entering BIOS at startup and selecting manually a partition to boot from?

            – Xavras Wyzryn
            Nov 10 '15 at 14:12
















          0














          A while back I almost installed an update of GRUB (Linux bootloader) on top of my Windows bootloader. This would make Windows unbootable. If this is your case, then data from the Windows partition is recoverable either by copying the data from within Kali, or by using the Windows install disk to repair the installation (have you tried that?).



          If you have indeed formatted the Windows partition, you can either try to recover the data yourself by using the software you mentioned, or by handing the hard drive over to a data recovery company. The thing is that the more you write on top of the former Windows partition, the less data it will be possible to recover.






          share|improve this answer
























          • Xavras Wyzryn So far I have been trying to get the "apt-get install update" to run properly. So the answer to have I tried the software or a recovery method is no, not yet. A little more detail about the install, it was my second time installing from a bootable usb so I thought I knew what I was doing. When asked what drive to save partition to I chose the main hard drive. That's why I think I may have formated the drive. I am going to try to get the rEFind to work 1st then try to recover if that doesn't work. It's been 3 days so I hope I haven't lost to much of my windows files.

            – The nuub
            Nov 9 '15 at 6:21













          • It's only showing 2 partitions the extended partition isn't shown. I can get rEFind to install or run. So Looks Like I am on the recovery route. I'll let you know the out come asap

            – The nuub
            Nov 9 '15 at 6:51











          • do you have any idea what to do when this happens trying to install rEFind. ShimSource is none Installing rEFInd on Linux.... The ESP doesn't seem to be mounted! Trying to find it.... // doesn't seem to be on a VFAT filesystem. The ESP must be mounted at //boot or //boot/efi and it must be VFAT! Aborting!

            – The nuub
            Nov 9 '15 at 7:10













          • @Thenuub: Instead of using rEFInd, have you tried entering BIOS at startup and selecting manually a partition to boot from?

            – Xavras Wyzryn
            Nov 10 '15 at 14:12














          0












          0








          0







          A while back I almost installed an update of GRUB (Linux bootloader) on top of my Windows bootloader. This would make Windows unbootable. If this is your case, then data from the Windows partition is recoverable either by copying the data from within Kali, or by using the Windows install disk to repair the installation (have you tried that?).



          If you have indeed formatted the Windows partition, you can either try to recover the data yourself by using the software you mentioned, or by handing the hard drive over to a data recovery company. The thing is that the more you write on top of the former Windows partition, the less data it will be possible to recover.






          share|improve this answer













          A while back I almost installed an update of GRUB (Linux bootloader) on top of my Windows bootloader. This would make Windows unbootable. If this is your case, then data from the Windows partition is recoverable either by copying the data from within Kali, or by using the Windows install disk to repair the installation (have you tried that?).



          If you have indeed formatted the Windows partition, you can either try to recover the data yourself by using the software you mentioned, or by handing the hard drive over to a data recovery company. The thing is that the more you write on top of the former Windows partition, the less data it will be possible to recover.







          share|improve this answer












          share|improve this answer



          share|improve this answer










          answered Nov 9 '15 at 5:03









          Xavras WyzrynXavras Wyzryn

          16615




          16615













          • Xavras Wyzryn So far I have been trying to get the "apt-get install update" to run properly. So the answer to have I tried the software or a recovery method is no, not yet. A little more detail about the install, it was my second time installing from a bootable usb so I thought I knew what I was doing. When asked what drive to save partition to I chose the main hard drive. That's why I think I may have formated the drive. I am going to try to get the rEFind to work 1st then try to recover if that doesn't work. It's been 3 days so I hope I haven't lost to much of my windows files.

            – The nuub
            Nov 9 '15 at 6:21













          • It's only showing 2 partitions the extended partition isn't shown. I can get rEFind to install or run. So Looks Like I am on the recovery route. I'll let you know the out come asap

            – The nuub
            Nov 9 '15 at 6:51











          • do you have any idea what to do when this happens trying to install rEFind. ShimSource is none Installing rEFInd on Linux.... The ESP doesn't seem to be mounted! Trying to find it.... // doesn't seem to be on a VFAT filesystem. The ESP must be mounted at //boot or //boot/efi and it must be VFAT! Aborting!

            – The nuub
            Nov 9 '15 at 7:10













          • @Thenuub: Instead of using rEFInd, have you tried entering BIOS at startup and selecting manually a partition to boot from?

            – Xavras Wyzryn
            Nov 10 '15 at 14:12



















          • Xavras Wyzryn So far I have been trying to get the "apt-get install update" to run properly. So the answer to have I tried the software or a recovery method is no, not yet. A little more detail about the install, it was my second time installing from a bootable usb so I thought I knew what I was doing. When asked what drive to save partition to I chose the main hard drive. That's why I think I may have formated the drive. I am going to try to get the rEFind to work 1st then try to recover if that doesn't work. It's been 3 days so I hope I haven't lost to much of my windows files.

            – The nuub
            Nov 9 '15 at 6:21













          • It's only showing 2 partitions the extended partition isn't shown. I can get rEFind to install or run. So Looks Like I am on the recovery route. I'll let you know the out come asap

            – The nuub
            Nov 9 '15 at 6:51











          • do you have any idea what to do when this happens trying to install rEFind. ShimSource is none Installing rEFInd on Linux.... The ESP doesn't seem to be mounted! Trying to find it.... // doesn't seem to be on a VFAT filesystem. The ESP must be mounted at //boot or //boot/efi and it must be VFAT! Aborting!

            – The nuub
            Nov 9 '15 at 7:10













          • @Thenuub: Instead of using rEFInd, have you tried entering BIOS at startup and selecting manually a partition to boot from?

            – Xavras Wyzryn
            Nov 10 '15 at 14:12

















          Xavras Wyzryn So far I have been trying to get the "apt-get install update" to run properly. So the answer to have I tried the software or a recovery method is no, not yet. A little more detail about the install, it was my second time installing from a bootable usb so I thought I knew what I was doing. When asked what drive to save partition to I chose the main hard drive. That's why I think I may have formated the drive. I am going to try to get the rEFind to work 1st then try to recover if that doesn't work. It's been 3 days so I hope I haven't lost to much of my windows files.

          – The nuub
          Nov 9 '15 at 6:21







          Xavras Wyzryn So far I have been trying to get the "apt-get install update" to run properly. So the answer to have I tried the software or a recovery method is no, not yet. A little more detail about the install, it was my second time installing from a bootable usb so I thought I knew what I was doing. When asked what drive to save partition to I chose the main hard drive. That's why I think I may have formated the drive. I am going to try to get the rEFind to work 1st then try to recover if that doesn't work. It's been 3 days so I hope I haven't lost to much of my windows files.

          – The nuub
          Nov 9 '15 at 6:21















          It's only showing 2 partitions the extended partition isn't shown. I can get rEFind to install or run. So Looks Like I am on the recovery route. I'll let you know the out come asap

          – The nuub
          Nov 9 '15 at 6:51





          It's only showing 2 partitions the extended partition isn't shown. I can get rEFind to install or run. So Looks Like I am on the recovery route. I'll let you know the out come asap

          – The nuub
          Nov 9 '15 at 6:51













          do you have any idea what to do when this happens trying to install rEFind. ShimSource is none Installing rEFInd on Linux.... The ESP doesn't seem to be mounted! Trying to find it.... // doesn't seem to be on a VFAT filesystem. The ESP must be mounted at //boot or //boot/efi and it must be VFAT! Aborting!

          – The nuub
          Nov 9 '15 at 7:10







          do you have any idea what to do when this happens trying to install rEFind. ShimSource is none Installing rEFInd on Linux.... The ESP doesn't seem to be mounted! Trying to find it.... // doesn't seem to be on a VFAT filesystem. The ESP must be mounted at //boot or //boot/efi and it must be VFAT! Aborting!

          – The nuub
          Nov 9 '15 at 7:10















          @Thenuub: Instead of using rEFInd, have you tried entering BIOS at startup and selecting manually a partition to boot from?

          – Xavras Wyzryn
          Nov 10 '15 at 14:12





          @Thenuub: Instead of using rEFInd, have you tried entering BIOS at startup and selecting manually a partition to boot from?

          – Xavras Wyzryn
          Nov 10 '15 at 14:12


















          draft saved

          draft discarded




















































          Thanks for contributing an answer to Unix & Linux Stack Exchange!


          • Please be sure to answer the question. Provide details and share your research!

          But avoid



          • Asking for help, clarification, or responding to other answers.

          • Making statements based on opinion; back them up with references or personal experience.


          To learn more, see our tips on writing great answers.




          draft saved


          draft discarded














          StackExchange.ready(
          function () {
          StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f241732%2fwindows-boot-partition-missing-after-kali-linux-installation%23new-answer', 'question_page');
          }
          );

          Post as a guest















          Required, but never shown





















































          Required, but never shown














          Required, but never shown












          Required, but never shown







          Required, but never shown

































          Required, but never shown














          Required, but never shown












          Required, but never shown







          Required, but never shown







          Popular posts from this blog

          濃尾地震

          How to rewrite equation of hyperbola in standard form

          No ethernet ip address in my vocore2