Just got a new adapter, AWUS036ACH, doesnt seem to be working on kali linux? [Macbook Pro 2018]












0















I am using a macbook pro 2018, and installed the drivers using



apt-get update
apt-get install realtek-rtl88xxau--dkms


and it installed all the needed software, then I ran the OS again and reconnected my device (Dont know if it matters but I use a USB hub due to thunderbolt outlets) and ran a series of tests. It seems to be working for a sec, had injections, then the light went out and it stopped working since. I see it is still connected but it doesnt seem to be injecting anymore.



    root@kali:~# iwconfig

wlan0 IEEE 802.11 ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=18 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off

lo no wireless extensions.

eth0 no wireless extensions.



root@kali:~# airmon-ng check kill

Killing these processes:

PID Name
706 wpa_supplicant



root@kali:~# airmon-ng start wlan0


PHY Interface Driver Chipset

phy0 wlan0 88XXau Realtek Semiconductor Corp. RTL8812AU 802.11a/b/g/n/ac WLAN Adapter
(monitor mode enabled)



root@kali:~# iwconfig

wlan0 IEEE 802.11 Mode:Monitor Frequency:2.457 GHz Tx-Power=18 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Power Management:off

lo no wireless extensions.

eth0 no wireless extensions.


root@kali:~# aireplay-ng -9 wlan0

19:25:43 Trying broadcast probe requests...
19:25:44 Injection is working!
19:25:45 Found 1 AP

19:25:45 Trying directed probe requests...
19:25:45 A0:04:60:1E:42:B3 - channel: 9 - 'SLOWWOLFJACK'
19:25:46 Ping (min/avg/max): 1.777ms/6.663ms/22.185ms Power: -40.46
19:25:46 26/30: 86%

root@kali:~# airodump-ng wlan CH 13 ][ Elapsed: 6 s ][ 2019-03-02 19:26

BSSID PWR Beacons #Data, #/s CH MB ENC CIPHER AUTH ESSID
CH 12 ][ Elapsed: 1 min ][ 2019-03-02 19:27

BSSID PWR Beacons #Data, #/s CH MB ENC CIPHER AUTH ESSIDAR21

A0:04:60:1E:42:B3 -41 64 17 0 9 720 WPA2 CCMP PSK SLOWWOLFJACK
CC:40:D0:7F:D0:C2 -44 102 104 0 4 195 WPA2 CCMP PSK NETGEAR21
BSSID STATION PWR Rate Lost Frames Probe
(not associated) 30:8C:FB:05:9E:F6 -33 0 - 1 0 4 NETGEAR21
(not associated) 7C:2E:BD:62:F9:52 -35 0 - 1 0 27 NETGEAR21 (not associated) 00:00:48:60:CC:77 -41 0 - 1 48 79 NETGEAR77
CC:40:D0:7F:D0:C2 8C:85:90:34:72:10 0 0e- 0e 980 87 NETGEAR21
CC:40:D0:7F:D0:C2 2C:AA:8E:09:BA:AA -39 0e- 1 3 14
CC:40:D0:7F:D0:C2 64:EB:8C:7B:D4:D7 -45 0 -24 0 3
CC:40:D0:7F:D0:C2 74:81:14:A5:EE:E0 -54 1e-24 0 2
CC:40:D0:7F:D0:C2 2C:AA:8E:09:1A:C1 -55 0e- 1e 0 17

root@kali:~# aireplay-ng -9 wlan0
19:27:13 Trying broadcast probe requests...
19:27:15 No Answer...
19:27:15 Found 0 APs

root@kali:~# aireplay-ng -9 wlan0
19:27:18 Trying broadcast probe requests...
19:27:20 No Answer...
19:27:20 Found 0 APs

root@kali:~# aireplay-ng -9 wlan0
19:27:21 Trying broadcast probe requests...
19:27:23 No Answer...
19:27:23 Found 0 APs

root@kali:~# aireplay-ng -9 wlan0
19:27:23 Trying broadcast probe requests...
19:27:25 No Answer...
19:27:25 Found 0 APs

root@kali:~# iwconfig

wlan0 IEEE 802.11 Mode:Monitor Frequency:2.467 GHz Tx-Power=18 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Power Management:off

lo no wireless extensions.

eth0 no wireless extensions.









share|improve this question









New contributor




Robert Lewis is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.

























    0















    I am using a macbook pro 2018, and installed the drivers using



    apt-get update
    apt-get install realtek-rtl88xxau--dkms


    and it installed all the needed software, then I ran the OS again and reconnected my device (Dont know if it matters but I use a USB hub due to thunderbolt outlets) and ran a series of tests. It seems to be working for a sec, had injections, then the light went out and it stopped working since. I see it is still connected but it doesnt seem to be injecting anymore.



        root@kali:~# iwconfig

    wlan0 IEEE 802.11 ESSID:off/any
    Mode:Managed Access Point: Not-Associated Tx-Power=18 dBm
    Retry short limit:7 RTS thr:off Fragment thr:off
    Encryption key:off
    Power Management:off

    lo no wireless extensions.

    eth0 no wireless extensions.



    root@kali:~# airmon-ng check kill

    Killing these processes:

    PID Name
    706 wpa_supplicant



    root@kali:~# airmon-ng start wlan0


    PHY Interface Driver Chipset

    phy0 wlan0 88XXau Realtek Semiconductor Corp. RTL8812AU 802.11a/b/g/n/ac WLAN Adapter
    (monitor mode enabled)



    root@kali:~# iwconfig

    wlan0 IEEE 802.11 Mode:Monitor Frequency:2.457 GHz Tx-Power=18 dBm
    Retry short limit:7 RTS thr:off Fragment thr:off
    Power Management:off

    lo no wireless extensions.

    eth0 no wireless extensions.


    root@kali:~# aireplay-ng -9 wlan0

    19:25:43 Trying broadcast probe requests...
    19:25:44 Injection is working!
    19:25:45 Found 1 AP

    19:25:45 Trying directed probe requests...
    19:25:45 A0:04:60:1E:42:B3 - channel: 9 - 'SLOWWOLFJACK'
    19:25:46 Ping (min/avg/max): 1.777ms/6.663ms/22.185ms Power: -40.46
    19:25:46 26/30: 86%

    root@kali:~# airodump-ng wlan CH 13 ][ Elapsed: 6 s ][ 2019-03-02 19:26

    BSSID PWR Beacons #Data, #/s CH MB ENC CIPHER AUTH ESSID
    CH 12 ][ Elapsed: 1 min ][ 2019-03-02 19:27

    BSSID PWR Beacons #Data, #/s CH MB ENC CIPHER AUTH ESSIDAR21

    A0:04:60:1E:42:B3 -41 64 17 0 9 720 WPA2 CCMP PSK SLOWWOLFJACK
    CC:40:D0:7F:D0:C2 -44 102 104 0 4 195 WPA2 CCMP PSK NETGEAR21
    BSSID STATION PWR Rate Lost Frames Probe
    (not associated) 30:8C:FB:05:9E:F6 -33 0 - 1 0 4 NETGEAR21
    (not associated) 7C:2E:BD:62:F9:52 -35 0 - 1 0 27 NETGEAR21 (not associated) 00:00:48:60:CC:77 -41 0 - 1 48 79 NETGEAR77
    CC:40:D0:7F:D0:C2 8C:85:90:34:72:10 0 0e- 0e 980 87 NETGEAR21
    CC:40:D0:7F:D0:C2 2C:AA:8E:09:BA:AA -39 0e- 1 3 14
    CC:40:D0:7F:D0:C2 64:EB:8C:7B:D4:D7 -45 0 -24 0 3
    CC:40:D0:7F:D0:C2 74:81:14:A5:EE:E0 -54 1e-24 0 2
    CC:40:D0:7F:D0:C2 2C:AA:8E:09:1A:C1 -55 0e- 1e 0 17

    root@kali:~# aireplay-ng -9 wlan0
    19:27:13 Trying broadcast probe requests...
    19:27:15 No Answer...
    19:27:15 Found 0 APs

    root@kali:~# aireplay-ng -9 wlan0
    19:27:18 Trying broadcast probe requests...
    19:27:20 No Answer...
    19:27:20 Found 0 APs

    root@kali:~# aireplay-ng -9 wlan0
    19:27:21 Trying broadcast probe requests...
    19:27:23 No Answer...
    19:27:23 Found 0 APs

    root@kali:~# aireplay-ng -9 wlan0
    19:27:23 Trying broadcast probe requests...
    19:27:25 No Answer...
    19:27:25 Found 0 APs

    root@kali:~# iwconfig

    wlan0 IEEE 802.11 Mode:Monitor Frequency:2.467 GHz Tx-Power=18 dBm
    Retry short limit:7 RTS thr:off Fragment thr:off
    Power Management:off

    lo no wireless extensions.

    eth0 no wireless extensions.









    share|improve this question









    New contributor




    Robert Lewis is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
    Check out our Code of Conduct.























      0












      0








      0








      I am using a macbook pro 2018, and installed the drivers using



      apt-get update
      apt-get install realtek-rtl88xxau--dkms


      and it installed all the needed software, then I ran the OS again and reconnected my device (Dont know if it matters but I use a USB hub due to thunderbolt outlets) and ran a series of tests. It seems to be working for a sec, had injections, then the light went out and it stopped working since. I see it is still connected but it doesnt seem to be injecting anymore.



          root@kali:~# iwconfig

      wlan0 IEEE 802.11 ESSID:off/any
      Mode:Managed Access Point: Not-Associated Tx-Power=18 dBm
      Retry short limit:7 RTS thr:off Fragment thr:off
      Encryption key:off
      Power Management:off

      lo no wireless extensions.

      eth0 no wireless extensions.



      root@kali:~# airmon-ng check kill

      Killing these processes:

      PID Name
      706 wpa_supplicant



      root@kali:~# airmon-ng start wlan0


      PHY Interface Driver Chipset

      phy0 wlan0 88XXau Realtek Semiconductor Corp. RTL8812AU 802.11a/b/g/n/ac WLAN Adapter
      (monitor mode enabled)



      root@kali:~# iwconfig

      wlan0 IEEE 802.11 Mode:Monitor Frequency:2.457 GHz Tx-Power=18 dBm
      Retry short limit:7 RTS thr:off Fragment thr:off
      Power Management:off

      lo no wireless extensions.

      eth0 no wireless extensions.


      root@kali:~# aireplay-ng -9 wlan0

      19:25:43 Trying broadcast probe requests...
      19:25:44 Injection is working!
      19:25:45 Found 1 AP

      19:25:45 Trying directed probe requests...
      19:25:45 A0:04:60:1E:42:B3 - channel: 9 - 'SLOWWOLFJACK'
      19:25:46 Ping (min/avg/max): 1.777ms/6.663ms/22.185ms Power: -40.46
      19:25:46 26/30: 86%

      root@kali:~# airodump-ng wlan CH 13 ][ Elapsed: 6 s ][ 2019-03-02 19:26

      BSSID PWR Beacons #Data, #/s CH MB ENC CIPHER AUTH ESSID
      CH 12 ][ Elapsed: 1 min ][ 2019-03-02 19:27

      BSSID PWR Beacons #Data, #/s CH MB ENC CIPHER AUTH ESSIDAR21

      A0:04:60:1E:42:B3 -41 64 17 0 9 720 WPA2 CCMP PSK SLOWWOLFJACK
      CC:40:D0:7F:D0:C2 -44 102 104 0 4 195 WPA2 CCMP PSK NETGEAR21
      BSSID STATION PWR Rate Lost Frames Probe
      (not associated) 30:8C:FB:05:9E:F6 -33 0 - 1 0 4 NETGEAR21
      (not associated) 7C:2E:BD:62:F9:52 -35 0 - 1 0 27 NETGEAR21 (not associated) 00:00:48:60:CC:77 -41 0 - 1 48 79 NETGEAR77
      CC:40:D0:7F:D0:C2 8C:85:90:34:72:10 0 0e- 0e 980 87 NETGEAR21
      CC:40:D0:7F:D0:C2 2C:AA:8E:09:BA:AA -39 0e- 1 3 14
      CC:40:D0:7F:D0:C2 64:EB:8C:7B:D4:D7 -45 0 -24 0 3
      CC:40:D0:7F:D0:C2 74:81:14:A5:EE:E0 -54 1e-24 0 2
      CC:40:D0:7F:D0:C2 2C:AA:8E:09:1A:C1 -55 0e- 1e 0 17

      root@kali:~# aireplay-ng -9 wlan0
      19:27:13 Trying broadcast probe requests...
      19:27:15 No Answer...
      19:27:15 Found 0 APs

      root@kali:~# aireplay-ng -9 wlan0
      19:27:18 Trying broadcast probe requests...
      19:27:20 No Answer...
      19:27:20 Found 0 APs

      root@kali:~# aireplay-ng -9 wlan0
      19:27:21 Trying broadcast probe requests...
      19:27:23 No Answer...
      19:27:23 Found 0 APs

      root@kali:~# aireplay-ng -9 wlan0
      19:27:23 Trying broadcast probe requests...
      19:27:25 No Answer...
      19:27:25 Found 0 APs

      root@kali:~# iwconfig

      wlan0 IEEE 802.11 Mode:Monitor Frequency:2.467 GHz Tx-Power=18 dBm
      Retry short limit:7 RTS thr:off Fragment thr:off
      Power Management:off

      lo no wireless extensions.

      eth0 no wireless extensions.









      share|improve this question









      New contributor




      Robert Lewis is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.












      I am using a macbook pro 2018, and installed the drivers using



      apt-get update
      apt-get install realtek-rtl88xxau--dkms


      and it installed all the needed software, then I ran the OS again and reconnected my device (Dont know if it matters but I use a USB hub due to thunderbolt outlets) and ran a series of tests. It seems to be working for a sec, had injections, then the light went out and it stopped working since. I see it is still connected but it doesnt seem to be injecting anymore.



          root@kali:~# iwconfig

      wlan0 IEEE 802.11 ESSID:off/any
      Mode:Managed Access Point: Not-Associated Tx-Power=18 dBm
      Retry short limit:7 RTS thr:off Fragment thr:off
      Encryption key:off
      Power Management:off

      lo no wireless extensions.

      eth0 no wireless extensions.



      root@kali:~# airmon-ng check kill

      Killing these processes:

      PID Name
      706 wpa_supplicant



      root@kali:~# airmon-ng start wlan0


      PHY Interface Driver Chipset

      phy0 wlan0 88XXau Realtek Semiconductor Corp. RTL8812AU 802.11a/b/g/n/ac WLAN Adapter
      (monitor mode enabled)



      root@kali:~# iwconfig

      wlan0 IEEE 802.11 Mode:Monitor Frequency:2.457 GHz Tx-Power=18 dBm
      Retry short limit:7 RTS thr:off Fragment thr:off
      Power Management:off

      lo no wireless extensions.

      eth0 no wireless extensions.


      root@kali:~# aireplay-ng -9 wlan0

      19:25:43 Trying broadcast probe requests...
      19:25:44 Injection is working!
      19:25:45 Found 1 AP

      19:25:45 Trying directed probe requests...
      19:25:45 A0:04:60:1E:42:B3 - channel: 9 - 'SLOWWOLFJACK'
      19:25:46 Ping (min/avg/max): 1.777ms/6.663ms/22.185ms Power: -40.46
      19:25:46 26/30: 86%

      root@kali:~# airodump-ng wlan CH 13 ][ Elapsed: 6 s ][ 2019-03-02 19:26

      BSSID PWR Beacons #Data, #/s CH MB ENC CIPHER AUTH ESSID
      CH 12 ][ Elapsed: 1 min ][ 2019-03-02 19:27

      BSSID PWR Beacons #Data, #/s CH MB ENC CIPHER AUTH ESSIDAR21

      A0:04:60:1E:42:B3 -41 64 17 0 9 720 WPA2 CCMP PSK SLOWWOLFJACK
      CC:40:D0:7F:D0:C2 -44 102 104 0 4 195 WPA2 CCMP PSK NETGEAR21
      BSSID STATION PWR Rate Lost Frames Probe
      (not associated) 30:8C:FB:05:9E:F6 -33 0 - 1 0 4 NETGEAR21
      (not associated) 7C:2E:BD:62:F9:52 -35 0 - 1 0 27 NETGEAR21 (not associated) 00:00:48:60:CC:77 -41 0 - 1 48 79 NETGEAR77
      CC:40:D0:7F:D0:C2 8C:85:90:34:72:10 0 0e- 0e 980 87 NETGEAR21
      CC:40:D0:7F:D0:C2 2C:AA:8E:09:BA:AA -39 0e- 1 3 14
      CC:40:D0:7F:D0:C2 64:EB:8C:7B:D4:D7 -45 0 -24 0 3
      CC:40:D0:7F:D0:C2 74:81:14:A5:EE:E0 -54 1e-24 0 2
      CC:40:D0:7F:D0:C2 2C:AA:8E:09:1A:C1 -55 0e- 1e 0 17

      root@kali:~# aireplay-ng -9 wlan0
      19:27:13 Trying broadcast probe requests...
      19:27:15 No Answer...
      19:27:15 Found 0 APs

      root@kali:~# aireplay-ng -9 wlan0
      19:27:18 Trying broadcast probe requests...
      19:27:20 No Answer...
      19:27:20 Found 0 APs

      root@kali:~# aireplay-ng -9 wlan0
      19:27:21 Trying broadcast probe requests...
      19:27:23 No Answer...
      19:27:23 Found 0 APs

      root@kali:~# aireplay-ng -9 wlan0
      19:27:23 Trying broadcast probe requests...
      19:27:25 No Answer...
      19:27:25 Found 0 APs

      root@kali:~# iwconfig

      wlan0 IEEE 802.11 Mode:Monitor Frequency:2.467 GHz Tx-Power=18 dBm
      Retry short limit:7 RTS thr:off Fragment thr:off
      Power Management:off

      lo no wireless extensions.

      eth0 no wireless extensions.






      wifi kali-linux






      share|improve this question









      New contributor




      Robert Lewis is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.











      share|improve this question









      New contributor




      Robert Lewis is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.









      share|improve this question




      share|improve this question








      edited 1 hour ago









      RalfFriedl

      5,4303925




      5,4303925






      New contributor




      Robert Lewis is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.









      asked 2 hours ago









      Robert LewisRobert Lewis

      1




      1




      New contributor




      Robert Lewis is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.





      New contributor





      Robert Lewis is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.






      Robert Lewis is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.






















          0






          active

          oldest

          votes











          Your Answer








          StackExchange.ready(function() {
          var channelOptions = {
          tags: "".split(" "),
          id: "106"
          };
          initTagRenderer("".split(" "), "".split(" "), channelOptions);

          StackExchange.using("externalEditor", function() {
          // Have to fire editor after snippets, if snippets enabled
          if (StackExchange.settings.snippets.snippetsEnabled) {
          StackExchange.using("snippets", function() {
          createEditor();
          });
          }
          else {
          createEditor();
          }
          });

          function createEditor() {
          StackExchange.prepareEditor({
          heartbeatType: 'answer',
          autoActivateHeartbeat: false,
          convertImagesToLinks: false,
          noModals: true,
          showLowRepImageUploadWarning: true,
          reputationToPostImages: null,
          bindNavPrevention: true,
          postfix: "",
          imageUploader: {
          brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
          contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
          allowUrls: true
          },
          onDemand: true,
          discardSelector: ".discard-answer"
          ,immediatelyShowMarkdownHelp:true
          });


          }
          });






          Robert Lewis is a new contributor. Be nice, and check out our Code of Conduct.










          draft saved

          draft discarded


















          StackExchange.ready(
          function () {
          StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f504031%2fjust-got-a-new-adapter-awus036ach-doesnt-seem-to-be-working-on-kali-linux-ma%23new-answer', 'question_page');
          }
          );

          Post as a guest















          Required, but never shown

























          0






          active

          oldest

          votes








          0






          active

          oldest

          votes









          active

          oldest

          votes






          active

          oldest

          votes








          Robert Lewis is a new contributor. Be nice, and check out our Code of Conduct.










          draft saved

          draft discarded


















          Robert Lewis is a new contributor. Be nice, and check out our Code of Conduct.













          Robert Lewis is a new contributor. Be nice, and check out our Code of Conduct.












          Robert Lewis is a new contributor. Be nice, and check out our Code of Conduct.
















          Thanks for contributing an answer to Unix & Linux Stack Exchange!


          • Please be sure to answer the question. Provide details and share your research!

          But avoid



          • Asking for help, clarification, or responding to other answers.

          • Making statements based on opinion; back them up with references or personal experience.


          To learn more, see our tips on writing great answers.




          draft saved


          draft discarded














          StackExchange.ready(
          function () {
          StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f504031%2fjust-got-a-new-adapter-awus036ach-doesnt-seem-to-be-working-on-kali-linux-ma%23new-answer', 'question_page');
          }
          );

          Post as a guest















          Required, but never shown





















































          Required, but never shown














          Required, but never shown












          Required, but never shown







          Required, but never shown

































          Required, but never shown














          Required, but never shown












          Required, but never shown







          Required, but never shown







          Popular posts from this blog

          濃尾地震

          How to rewrite equation of hyperbola in standard form

          No ethernet ip address in my vocore2