Why do I get the message set no match when I run this script?
1
#! /usr/bin/tcsh -f
set ps_output = "`ps -u $user`"
@ i = 2
echo "$ps_output"
set ps_test
while ( $i <= $#ps_output )
set line = ( $ps_output[$i] )
if ( $line[4] != "ps" && $line[4] != "tcsh" && $line[4] != "zap" ) then
set ps_test = ( $ps_test $i )
endif
@ i ++
end
foreach i ( $ps_test )
set line = ( $ps_output[$i] )
set process_no = $line[1]
if ( $line[4] == "HAL9000" || $line[4] == "HALos" || $line[4] == "HALshell" || $line[4] == "HALkeyboardDriv" || $line[4] == "HALdisplayDrive" || $line[4] == "HALdiskDriver" ) then
kill -9 $process_no
endif
end
exit 0
So I keep getting the set no match error in my script, but i couldn't find which set is responsible for that , I mean even when I commented out
set ps_test , I still get a no set match, is there a way to fix this
shell-script ps tcsh
edited Apr 27 '16 at 14:22
Anthon
60.6k17102165
asked Jan 22 '16 at 5:51
alkabaryalkabary
589923
bumped to the homepage by Community♦ 18 mins ago
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
add a comment |
1
#! /usr/bin/tcsh -f
set ps_output = "`ps -u $user`"
@ i = 2
echo "$ps_output"
set ps_test
while ( $i <= $#ps_output )
set line = ( $ps_output[$i] )
if ( $line[4] != "ps" && $line[4] != "tcsh" && $line[4] != "zap" ) then
set ps_test = ( $ps_test $i )
endif
@ i ++
end
foreach i ( $ps_test )
set line = ( $ps_output[$i] )
set process_no = $line[1]
if ( $line[4] == "HAL9000" || $line[4] == "HALos" || $line[4] == "HALshell" || $line[4] == "HALkeyboardDriv" || $line[4] == "HALdisplayDrive" || $line[4] == "HALdiskDriver" ) then
kill -9 $process_no
endif
end
exit 0
So I keep getting the set no match error in my script, but i couldn't find which set is responsible for that , I mean even when I commented out
set ps_test , I still get a no set match, is there a way to fix this
shell-script ps tcsh
edited Apr 27 '16 at 14:22
Anthon
60.6k17102165
asked Jan 22 '16 at 5:51
alkabaryalkabary
589923
bumped to the homepage by Community♦ 18 mins ago
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
3
Quite frankly, your first error is scripting in tcsh :). Even thetcshFAQ itself links to the famous essay on why the csh family of shells shouldn't be used for scripting. That said, the way to debug this sort of thing is to addechostatements everywhere and see what values your variables are taking. In my case, it choked onpslines containing?which, I think, was treated as a glob and changed the value I was setting.
– terdon♦
Jan 22 '16 at 10:40
1
What @terdon said. I suspect you're running into a case of accidental globbing, though. Try addingset noglobto the top of the script.
– Martin Tournoij
Jan 22 '16 at 16:21
add a comment |
1
1
1
#! /usr/bin/tcsh -f
set ps_output = "`ps -u $user`"
@ i = 2
echo "$ps_output"
set ps_test
while ( $i <= $#ps_output )
set line = ( $ps_output[$i] )
if ( $line[4] != "ps" && $line[4] != "tcsh" && $line[4] != "zap" ) then
set ps_test = ( $ps_test $i )
endif
@ i ++
end
foreach i ( $ps_test )
set line = ( $ps_output[$i] )
set process_no = $line[1]
if ( $line[4] == "HAL9000" || $line[4] == "HALos" || $line[4] == "HALshell" || $line[4] == "HALkeyboardDriv" || $line[4] == "HALdisplayDrive" || $line[4] == "HALdiskDriver" ) then
kill -9 $process_no
endif
end
exit 0
So I keep getting the set no match error in my script, but i couldn't find which set is responsible for that , I mean even when I commented out
set ps_test , I still get a no set match, is there a way to fix this
shell-script ps tcsh
edited Apr 27 '16 at 14:22
Anthon
60.6k17102165
asked Jan 22 '16 at 5:51
alkabaryalkabary
589923
#! /usr/bin/tcsh -f
set ps_output = "`ps -u $user`"
@ i = 2
echo "$ps_output"
set ps_test
while ( $i <= $#ps_output )
set line = ( $ps_output[$i] )
if ( $line[4] != "ps" && $line[4] != "tcsh" && $line[4] != "zap" ) then
set ps_test = ( $ps_test $i )
endif
@ i ++
end
foreach i ( $ps_test )
set line = ( $ps_output[$i] )
set process_no = $line[1]
if ( $line[4] == "HAL9000" || $line[4] == "HALos" || $line[4] == "HALshell" || $line[4] == "HALkeyboardDriv" || $line[4] == "HALdisplayDrive" || $line[4] == "HALdiskDriver" ) then
kill -9 $process_no
endif
end
exit 0
So I keep getting the set no match error in my script, but i couldn't find which set is responsible for that , I mean even when I commented out
set ps_test , I still get a no set match, is there a way to fix this
shell-script ps tcsh
shell-script ps tcsh
edited Apr 27 '16 at 14:22
Anthon
60.6k17102165
asked Jan 22 '16 at 5:51
alkabaryalkabary
589923
edited Apr 27 '16 at 14:22
Anthon
60.6k17102165
asked Jan 22 '16 at 5:51
alkabaryalkabary
589923
edited Apr 27 '16 at 14:22
Anthon
60.6k17102165
edited Apr 27 '16 at 14:22
Anthon
60.6k17102165
edited Apr 27 '16 at 14:22
Anthon
60.6k17102165
60.6k17102165
asked Jan 22 '16 at 5:51
alkabaryalkabary
589923
asked Jan 22 '16 at 5:51
alkabaryalkabary
589923
asked Jan 22 '16 at 5:51
alkabaryalkabary
589923
589923
bumped to the homepage by Community♦ 18 mins ago
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
bumped to the homepage by Community♦ 18 mins ago
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
3
Quite frankly, your first error is scripting in tcsh :). Even thetcshFAQ itself links to the famous essay on why the csh family of shells shouldn't be used for scripting. That said, the way to debug this sort of thing is to addechostatements everywhere and see what values your variables are taking. In my case, it choked onpslines containing?which, I think, was treated as a glob and changed the value I was setting.
– terdon♦
Jan 22 '16 at 10:40
1
What @terdon said. I suspect you're running into a case of accidental globbing, though. Try addingset noglobto the top of the script.
– Martin Tournoij
Jan 22 '16 at 16:21
add a comment |
3
Quite frankly, your first error is scripting in tcsh :). Even thetcshFAQ itself links to the famous essay on why the csh family of shells shouldn't be used for scripting. That said, the way to debug this sort of thing is to addechostatements everywhere and see what values your variables are taking. In my case, it choked onpslines containing?which, I think, was treated as a glob and changed the value I was setting.
– terdon♦
Jan 22 '16 at 10:40
1
What @terdon said. I suspect you're running into a case of accidental globbing, though. Try addingset noglobto the top of the script.
– Martin Tournoij
Jan 22 '16 at 16:21
3
3
Quite frankly, your first error is scripting in tcsh :). Even the
tcsh FAQ itself links to the famous essay on why the csh family of shells shouldn't be used for scripting. That said, the way to debug this sort of thing is to add echo statements everywhere and see what values your variables are taking. In my case, it choked on ps lines containing ? which, I think, was treated as a glob and changed the value I was setting.– terdon♦
Jan 22 '16 at 10:40
Quite frankly, your first error is scripting in tcsh :). Even the
tcsh FAQ itself links to the famous essay on why the csh family of shells shouldn't be used for scripting. That said, the way to debug this sort of thing is to add echo statements everywhere and see what values your variables are taking. In my case, it choked on ps lines containing ? which, I think, was treated as a glob and changed the value I was setting.– terdon♦
Jan 22 '16 at 10:40
1
1
What @terdon said. I suspect you're running into a case of accidental globbing, though. Try adding
set noglob to the top of the script.– Martin Tournoij
Jan 22 '16 at 16:21
What @terdon said. I suspect you're running into a case of accidental globbing, though. Try adding
set noglob to the top of the script.– Martin Tournoij
Jan 22 '16 at 16:21
add a comment |
1 Answer
1
active
oldest
votes
0
An alternative is to use pkill on one line either on the command line or in a script.
pkill -9 -u $USER '(HAL9000|HALos|HALshell|HALkeyboardDrv||HALdisplayDrive|HALdiskDriver)'
answered Jan 23 '16 at 20:36
Craig SmallCraig Small
48626
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "106"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f256936%2fwhy-do-i-get-the-message-set-no-match-when-i-run-this-script%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
0
An alternative is to use pkill on one line either on the command line or in a script.
pkill -9 -u $USER '(HAL9000|HALos|HALshell|HALkeyboardDrv||HALdisplayDrive|HALdiskDriver)'
answered Jan 23 '16 at 20:36
Craig SmallCraig Small
48626
add a comment |
0
An alternative is to use pkill on one line either on the command line or in a script.
pkill -9 -u $USER '(HAL9000|HALos|HALshell|HALkeyboardDrv||HALdisplayDrive|HALdiskDriver)'
answered Jan 23 '16 at 20:36
Craig SmallCraig Small
48626
add a comment |
0
0
0
An alternative is to use pkill on one line either on the command line or in a script.
pkill -9 -u $USER '(HAL9000|HALos|HALshell|HALkeyboardDrv||HALdisplayDrive|HALdiskDriver)'
answered Jan 23 '16 at 20:36
Craig SmallCraig Small
48626
An alternative is to use pkill on one line either on the command line or in a script.
pkill -9 -u $USER '(HAL9000|HALos|HALshell|HALkeyboardDrv||HALdisplayDrive|HALdiskDriver)'
answered Jan 23 '16 at 20:36
Craig SmallCraig Small
48626
answered Jan 23 '16 at 20:36
Craig SmallCraig Small
48626
answered Jan 23 '16 at 20:36
Craig SmallCraig Small
48626
answered Jan 23 '16 at 20:36
Craig SmallCraig Small
48626
48626
add a comment |
add a comment |
draft saved
draft discarded
Thanks for contributing an answer to Unix & Linux Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f256936%2fwhy-do-i-get-the-message-set-no-match-when-i-run-this-script%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
3
Quite frankly, your first error is scripting in tcsh :). Even the
tcshFAQ itself links to the famous essay on why the csh family of shells shouldn't be used for scripting. That said, the way to debug this sort of thing is to addechostatements everywhere and see what values your variables are taking. In my case, it choked onpslines containing?which, I think, was treated as a glob and changed the value I was setting.– terdon♦
Jan 22 '16 at 10:40
1
What @terdon said. I suspect you're running into a case of accidental globbing, though. Try adding
set noglobto the top of the script.– Martin Tournoij
Jan 22 '16 at 16:21