Yrurtj

I recently built a new system, and my graphics are having... problems. The GUI will freeze up frequently and for minutes at a time. I'm running the proprietary drivers, and didn't have this problem with nouveau, but nouveau also didn't recognize my GPU or let me set up my second monitor.

Running dmesg | grep NVRM yields

[    3.909853] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  375.66  Mon May  1 15:29:16 PDT 2017 (using threaded interrupts)

[  350.982860] NVRM: GPU at PCI:0000:09:00: GPU-7276b506-d343-19d6-901c-e9b2d011f0b4

[  350.982868] NVRM: GPU Board Serial Number: 

[  350.982873] NVRM: Xid (PCI:0000:09:00): 32, Channel ID 00000020 intr 00040000

[  355.100050] NVRM: Xid (PCI:0000:09:00): 32, Channel ID 00000028 intr 00040000

[  409.548334] NVRM: Xid (PCI:0000:09:00): 31, Ch 00000028, engmask 00000101, intr 10000000

[  413.293746] NVRM: Xid (PCI:0000:09:00): 32, Channel ID 00000028 intr 00040000

[ 4082.537408] NVRM: Xid (PCI:0000:09:00): 32, Channel ID 00000020 intr 00040000

but these Xid errors don't mean a whole lot to me.

xrandr gives

Screen 0: minimum 8 x 8, current 2806 x 900, maximum 32767 x 32767

DVI-D-0 connected primary 1440x900+0+0 (normal left inverted right x axis y axis) 410mm x 256mm

   1440x900      59.89*+

   1280x800      59.81  

   1280x720      60.00  

   1152x864      75.00  

   1024x768      75.03    70.07    60.00  

   800x600       75.00    72.19    60.32    56.25  

   640x480       75.00    72.81    59.94  

HDMI-0 connected 1366x768+1440+132 (normal left inverted right x axis y axis) 410mm x 230mm

   1366x768      59.86*+

   1920x1080     59.94  

   1280x1024     75.02    60.02  

   1280x960      60.00  

   1280x800      59.81  

   1280x720      60.00    59.94  

   1152x864      75.00  

   1024x768      75.03    70.07    60.00  

   800x600       75.00    72.19    60.32    56.25  

   720x480       59.94  

   640x480       75.00    72.81    59.94    59.93  

DP-0 disconnected (normal left inverted right x axis y axis)

DP-1 disconnected (normal left inverted right x axis y axis)

I have a GeForce GTX 1050 Ti. Any ideas on what I might try?

I can't add comments yet, so have to ask here. How did you install the proprietary drivers? I've done it a number of times on my systems, and keep forgetting the exact steps, but I just run the one-file download from nvidia from the shell, and it guides me (generally run from terminal with root - without X). It's important that it compiles necessary libs with your current kernel libs.

Also, did you check /usr/bin/nvidia-settings ? (just to do a general check on settings, I guess).

What about the Xorg.0.log? It should give more details on errors than dmesg.

Quoting NVIDIA's XID Errors page:

The Xid message is an error report from the NVIDIA driver that is printed to the operating system's kernel log or event log. Xid messages indicate that a general GPU error occurred, most often due to the driver programming the GPU incorrectly or to corruption of the commands sent to the GPU. The messages can be indicative of a hardware problem, an NVIDIA software problem, or a user application problem.

[  350.982873] NVRM: Xid (PCI:0000:09:00): 32, Channel ID 00000020 intr 00040000

PCI:0000:09:00 is the device ID, and 32 is XID error id, in this case:

Invalid or corrupted push buffer stream

1. You can try reinstalling all nvidia packages (apt purge nvidia.) Debian provides.


2. If that does not help, then try the newest drivers from NVIDIA.