How to configure redirect on OpenWrt?
0
Below is uci config and rules that it produces:
uci add firewall redirect
uci set firewall.@redirect[-1].target=DNAT
uci set firewall.@redirect[-1].proto=tcp
uci set firewall.@redirect[-1].src=wan
uci set firewall.@redirect[-1].src_dport=80
uci set firewall.@redirect[-1].dest=lan
uci set firewall.@redirect[-1].dest_port=80
uci set firewall.@redirect[-1].dest_ip=10.0.0.10
uci commit firewall
iptables -t nat -A zone_wan_prerouting -p tcp -m tcp --dport 80 -j DNAT --to-destination 10.0.0.10:80
iptables -t nat -D zone_lan_prerouting -p tcp -s 10.0.0.0/255.0.0.0 -d <external_ip_of_router> -m tcp --dport 80 -j DNAT --to-destination 10.0.0.10:80
iptables -t nat -A zone_lan_prerouting -p tcp -s 10.0.0.0/255.0.0.0 -d <external_ip_of_router> -m tcp --dport 80 -j DNAT --to-destination 10.0.0.10:80
iptables -t nat -D zone_lan_postrouting -p tcp -s 10.0.0.0/255.0.0.0 -d 10.0.0.10 -m tcp --dport 80 -j SNAT --to-source 10.0.0.1
iptables -t nat -A zone_lan_postrouting -p tcp -s 10.0.0.0/255.0.0.0 -d 10.0.0.10 -m tcp --dport 80 -j SNAT --to-source 10.0.0.1
1) Why it does not work?
2) Why it generates lines with <external_ip_of_router>?
3) Why it generates lines with -D for second and third cases, but not the first?
(To get the iptables commands, I used fw3 -4 print before and after uci config, and then diff.)
openwrt
asked 27 mins ago
Igor LiferenkoIgor Liferenko
25618
add a comment |
0
Below is uci config and rules that it produces:
uci add firewall redirect
uci set firewall.@redirect[-1].target=DNAT
uci set firewall.@redirect[-1].proto=tcp
uci set firewall.@redirect[-1].src=wan
uci set firewall.@redirect[-1].src_dport=80
uci set firewall.@redirect[-1].dest=lan
uci set firewall.@redirect[-1].dest_port=80
uci set firewall.@redirect[-1].dest_ip=10.0.0.10
uci commit firewall
iptables -t nat -A zone_wan_prerouting -p tcp -m tcp --dport 80 -j DNAT --to-destination 10.0.0.10:80
iptables -t nat -D zone_lan_prerouting -p tcp -s 10.0.0.0/255.0.0.0 -d <external_ip_of_router> -m tcp --dport 80 -j DNAT --to-destination 10.0.0.10:80
iptables -t nat -A zone_lan_prerouting -p tcp -s 10.0.0.0/255.0.0.0 -d <external_ip_of_router> -m tcp --dport 80 -j DNAT --to-destination 10.0.0.10:80
iptables -t nat -D zone_lan_postrouting -p tcp -s 10.0.0.0/255.0.0.0 -d 10.0.0.10 -m tcp --dport 80 -j SNAT --to-source 10.0.0.1
iptables -t nat -A zone_lan_postrouting -p tcp -s 10.0.0.0/255.0.0.0 -d 10.0.0.10 -m tcp --dport 80 -j SNAT --to-source 10.0.0.1
1) Why it does not work?
2) Why it generates lines with <external_ip_of_router>?
3) Why it generates lines with -D for second and third cases, but not the first?
(To get the iptables commands, I used fw3 -4 print before and after uci config, and then diff.)
openwrt
asked 27 mins ago
Igor LiferenkoIgor Liferenko
25618
add a comment |
0
0
0
Below is uci config and rules that it produces:
uci add firewall redirect
uci set firewall.@redirect[-1].target=DNAT
uci set firewall.@redirect[-1].proto=tcp
uci set firewall.@redirect[-1].src=wan
uci set firewall.@redirect[-1].src_dport=80
uci set firewall.@redirect[-1].dest=lan
uci set firewall.@redirect[-1].dest_port=80
uci set firewall.@redirect[-1].dest_ip=10.0.0.10
uci commit firewall
iptables -t nat -A zone_wan_prerouting -p tcp -m tcp --dport 80 -j DNAT --to-destination 10.0.0.10:80
iptables -t nat -D zone_lan_prerouting -p tcp -s 10.0.0.0/255.0.0.0 -d <external_ip_of_router> -m tcp --dport 80 -j DNAT --to-destination 10.0.0.10:80
iptables -t nat -A zone_lan_prerouting -p tcp -s 10.0.0.0/255.0.0.0 -d <external_ip_of_router> -m tcp --dport 80 -j DNAT --to-destination 10.0.0.10:80
iptables -t nat -D zone_lan_postrouting -p tcp -s 10.0.0.0/255.0.0.0 -d 10.0.0.10 -m tcp --dport 80 -j SNAT --to-source 10.0.0.1
iptables -t nat -A zone_lan_postrouting -p tcp -s 10.0.0.0/255.0.0.0 -d 10.0.0.10 -m tcp --dport 80 -j SNAT --to-source 10.0.0.1
1) Why it does not work?
2) Why it generates lines with <external_ip_of_router>?
3) Why it generates lines with -D for second and third cases, but not the first?
(To get the iptables commands, I used fw3 -4 print before and after uci config, and then diff.)
openwrt
asked 27 mins ago
Igor LiferenkoIgor Liferenko
25618
Below is uci config and rules that it produces:
uci add firewall redirect
uci set firewall.@redirect[-1].target=DNAT
uci set firewall.@redirect[-1].proto=tcp
uci set firewall.@redirect[-1].src=wan
uci set firewall.@redirect[-1].src_dport=80
uci set firewall.@redirect[-1].dest=lan
uci set firewall.@redirect[-1].dest_port=80
uci set firewall.@redirect[-1].dest_ip=10.0.0.10
uci commit firewall
iptables -t nat -A zone_wan_prerouting -p tcp -m tcp --dport 80 -j DNAT --to-destination 10.0.0.10:80
iptables -t nat -D zone_lan_prerouting -p tcp -s 10.0.0.0/255.0.0.0 -d <external_ip_of_router> -m tcp --dport 80 -j DNAT --to-destination 10.0.0.10:80
iptables -t nat -A zone_lan_prerouting -p tcp -s 10.0.0.0/255.0.0.0 -d <external_ip_of_router> -m tcp --dport 80 -j DNAT --to-destination 10.0.0.10:80
iptables -t nat -D zone_lan_postrouting -p tcp -s 10.0.0.0/255.0.0.0 -d 10.0.0.10 -m tcp --dport 80 -j SNAT --to-source 10.0.0.1
iptables -t nat -A zone_lan_postrouting -p tcp -s 10.0.0.0/255.0.0.0 -d 10.0.0.10 -m tcp --dport 80 -j SNAT --to-source 10.0.0.1
1) Why it does not work?
2) Why it generates lines with <external_ip_of_router>?
3) Why it generates lines with -D for second and third cases, but not the first?
(To get the iptables commands, I used fw3 -4 print before and after uci config, and then diff.)
openwrt
openwrt
asked 27 mins ago
Igor LiferenkoIgor Liferenko
25618
asked 27 mins ago
Igor LiferenkoIgor Liferenko
25618
asked 27 mins ago
Igor LiferenkoIgor Liferenko
25618
asked 27 mins ago
Igor LiferenkoIgor Liferenko
25618
asked 27 mins ago
Igor LiferenkoIgor Liferenko
25618
25618
add a comment |
add a comment |
0
active
oldest
votes
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "106"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f497624%2fhow-to-configure-redirect-on-openwrt%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
0
active
oldest
votes
0
active
oldest
votes
active
oldest
votes
active
oldest
votes
draft saved
draft discarded
Thanks for contributing an answer to Unix & Linux Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f497624%2fhow-to-configure-redirect-on-openwrt%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
